DCLEAD

The DC LEAD is a handy little splitter, that allows you to power multiple cameras from one centralised power supply.

Using this with a 2amp or 5amp 12v Power supply makes CCTV installations hassle free and means you dont need to use as many sockets.

DCLEAD8

The 8 way DC LEAD is a handy little splitter, that allows you to power multiple cameras from one centralised power supply.

Using this with a 2amp or 5amp 12v Power supply makes CCTV installations hassle free and means you dont need to use as many sockets.

Features

UK Plug type Regulated 12VDC 500ma power adaptor for CCTV Cameras and other devices. These plug-in units are regulated to keep the output voltage constant at 12vdc.

Input Voltage: 240V AC

Output Voltage: 12V DC Regulated

CE Approved

1 Year Return to Base Warranty

Plug top type Regulated 12VDC power adaptor for CCTV Cameras. These plug-in units are regulated to keep the output voltage constant at 12vdc.

Input Voltage: 240V AC

Output Voltage: 12V DC Regulated

CE Approved

1 Year Guarantee

Features

Heavy Duty 5 Amp power adaptors to run upto 9 cameras. These plug-in units are regulated to keep the output voltage constant at 12vdc. Comes with a UK Power Lead.

Features
 
9 WAY POWER DISTRIBUTOR - FLYING LEAD INPUT

The power distribution box makes it simple to supply multiple CCTV cameras or other security devices with separate auto-reset, PTC-fused* Power outlets.

It provided 9 PTC fused outputs and individual status LEDs, as well as surge protection.
1) Individually protected PTC type output fuse rated 1.1Amps /250VAC.
2) Individual status LED indicators.
3) Surge protected outputs.
4) Support 1-30VAC/VDC.
5) 9 PTC fused outputs on the top

PTC (resettable fuse) technology utilizes a unique Lead-Free polymer-based, Positive Temperature Coefficient (PTC) material to protect electrical circuits from over-current conditions. During normal operation, numerous carbon paths within the polymer allow the device to conduct electricity. As current through the PTC (resettable fuse) reaches its rated threshold, the polymer material begins to heat causing the polymer to expand. The resulting expansion breaks the carbon chains to reduce the current through the circuit to a small leakage current. The increased resistance in the resettable fuse works to protect circuitry by limiting potentially damaging current. When the fault (overcurrent) is removed from the circuit, the PTC (resettable fuse) will reset itself thereby allowing current to flow through the circuit again.

Features

When traditional fuses are being used for overcurrent protection it can only protect once then it must be replaced. The PTC resetable fuse is a new-type of overcurrent protection element which has two functions providing overcurrent protection and automatic reset.
The overcurrent protection PTC element is serially connected to the circuit and under normal circumstances it provides a low resistance state and can ensure the normal working of the circuit. If a short circuit or unusually high current occurs, the PTC fuses cut in to reduce the voltage down to a trickle thus preventing damage and protecting the equipment.
The PTC fuse will automatically reset once the fault in the overcurrent is removed. The PTC elements will automatically return to its low resistance state, which not only avoids maintenance or replacement but also avoids a continuously circulating switching state which can cause circuit damage.

9 Port x 10 Amp 12v Power Supply

Features

When traditional fuses are being used for overcurrent protection it can only protect once then it must be replaced. The PTC resetable fuse is a new-type of overcurrent protection element which has two functions providing overcurrent protection and automatic reset.
The overcurrent protection PTC element is serially connected to the circuit and under normal circumstances it provides a low resistance state and can ensure the normal working of the circuit. If a short circuit or unusually high current occurs, the PTC fuses cut in to reduce the voltage down to a trickle thus preventing damage and protecting the equipment.
The PTC fuse will automatically reset once the fault in the overcurrent is removed. The PTC elements will automatically return to its low resistance state, which not only avoids maintenance or replacement but also avoids a continuously circulating switching state which can cause circuit damage.

16 Port x 20 Amp 12v Power Supply

REBATPACK

When you are fitting CCTV for a living, its worth having tools or equipment that make you more efficient at your job. After all it saves you time and makes you money.

Our new Handy-Battery is one of those truly indispensable products that we use in our own workshops on a daily basis, which we thought our customers would benefit from so we made it commercially available to all. It can be used to power any 12V camera or 12V LCD monitor and its truly portable size means its great for testing cameras on or off site.

What is the Handy-Battery?

The Handy-Battery is a compact 12V power pack with an industry standard 2.1mm DC power plug. Using the latest Nickel metal hydride cells (Ni-MH), the Handy-Battery provides a high capacity 2000mAh charge, is relatively light and suffers no "memory effect" that causes standard Ni-Cad cells to fail after repeated short charges. The Handy-Battery can be recharged up to 1000 times!

Its compact size is only 15mm thick and 74mm by 102mm meaning it is easy to use in covert applications even with "body worn" CCTV equipment. The Handy-Battery even makes a great replacement battery where the original battery has failed or you need a spare one for convenience.